input resistorの例文
- Obviously the input resistors on each channel must be sufficiently large such that they do not load the source too much.
- So if you use 10kohm input resistors you aint going to affect the source voltage too much . talk ) 01 : 26, 29 January 2009 ( UTC)
- These additions make two substantial improvements to the OTA . First, when used with input resistors, the diodes distort the differential input voltage to offset a significant amount of input stage non linearity at higher differential input voltages.
- The logical operation comparison ( the input resistor network acts as a parallel " voltage summer " with equally weighted inputs and the following common-emitter transistor stage as a " voltage comparator " with a threshold about 0.7 V ).
- Using typical values of the reference resistors R _ { p } and R _ { n } of 10k ohms and an input resistor of 50k ohms, we can achieve a 16 bit resolution during the run-up phase with 655360 periods ( 65.5 milliseconds with a 10 MHz clock ).
携帯版